M3 x 14mm T10 Torx Cap Head Captive Screws (ISO 14579) - Stainless Steel (A2) Description
The M3 x 14mm T10 Torx Cap Head Captive Screws (ISO 14579) - Stainless Steel (A2) has the following features:
- 3mm Head Length (H)
- ISO 14579 Manufacturing Standard
- 14mm Length (L)
- 6mm Thread Length (E)
- T10 Torx Size
- Stainless Steel (A2) Material
- Stainless Steel (A2) Material Specification
- Natural Finish
- 0.5mm Thread Pitch
- Metric Metric or Imperial?
- M3 (3mm) Thread Size
- 5.5mm Head Diameter (D)
- 2.2mm Captive Diameter (d)
- 8mm Captive Length
- +0/-0.18mm Head Diameter (D) Tolerance
- +0/-0.14mm Head Length (H) Tolerance
Discover more about the Torx Cap Head Captive Screws range.
Torx Cap Head Captive Screws feature an unthreaded shank below the head. This unthreaded portion accommodates a Captive Washer, which locks in place to prevent the fastener from being fully removed after installation. Hexalobular Captive Screws utilise a Torx drive to minimise cam-out and increase tool life. Captive Screws are commonly used for safety reasons, and are required by EU law in certain safety equipment.
For more information on these components, please see Accu's full Captive Screws range, or visit our What is a Captive Screw? page.
Metric Torx Cap Head Captive Screws
Accu offers Hexalobular Cap Head Captive Screws is a full range of metric sizes. Thread diameters range from M2 up to M6, and lengths are available between 8mm and 50mm.
Custom Manufactured Captive Screws
Accu can offer bespoke manufactured Captive Screws on request. If your requirement is not listed in our standard range, please contact us or submit your technical drawing to MADEbyACCU.