0.25 x 0.5 inch Flush Head Self Clinch Pins - Carbon Steel (Grade 6) Zinc Plated Description
The 0.25 x 0.5 inch Flush Head Self Clinch Pins - Carbon Steel (Grade 6) Zinc Plated has the following features:
0.09 inch Head Length (H)
0.5 inch Length (L)
Carbon Steel (Grade 6) Material
Carbon Steel (Grade 6) Material Specification
Zinc Plated Finish
Not Standardised Standard
0.34 inch Head Diameter (D)
Imperial Metric or Imperial
0.25 inch Shaft Diameter (d)
0.273 - 0.276 inch Hole Size Range (h)
0.04 inch Panel Thickness Min (T)
6500lbs Insatallation Force (Steel Sheet)
250lbs Pushout Force (Steel Sheet)
Discover more about the Flush Head Self Clinch Pins range
Self Clinching pins are designed for insertion into sheet metal as a locating feature. They are to be installed by pressing into a drilled, punched or laser cut hole, during which the metal deforms and cold flows into the features at the base of the pin. This locks the pin in place as a permanent feature Self Clinching Flush Head Pins when installed leave a flush surface on the rear face of the sheet, to reduce the risk of snagging and leave a neat finish. these parts should not be installed too close to the edge of a sheet, to reduce deformation and retain positioning accuracy. The data for this figure is located in each product description.
Self clinching Flush head pins are available in Stainless Stell (A1) and Carbon steel. Carbon steel parts are supplied Trivalent Zinc plated.
Our PX-3 Matte Black Coatings can be applied to Self Clinching Pins on request.
Imperial Self Clinching Flush head Pins
Imperial Self Clinching Flush head pins are available in a range of diameters form 0.187" to 0.25", in lengths from 0.375" to 1". This dimension does not include the sheet thickness, and this will need to be taken into account to calculate protrusion.