M10 Metric Flat Washers (DIN 125A) - Hot Dip Galvanised Mild Steel (Grade 4.6) Description
The M10 Metric Flat Washers (DIN 125A) - Hot Dip Galvanised Mild Steel (Grade 4.6) has the following features:
DIN 125A Manufacturing Standard
10.5mm Internal Diameter (ID)
20mm External Diameter (OD)
2mm Thickness (T)
Mild Steel (Grade 4.6) Material
Mild Steel (Grade 4.6) Material Specification
Hot Dip Galvanised Finish
Metric Metric or Imperial?
M10 (10mm) For Use With Thread Size
Discover more about the Metric Flat Washers range.
Flat Washers, one of Accu's Washer & Spacer range, are designed primarily to enhance the load-bearing capabilities of a threaded fastener, and are compatible with a wide range of Precision Screws. Flat Washers are versatile components with a variety of uses, including spacing, pre-load indication, and wear-protection.
Flat Washers are available in several variants with varying diameters and thicknesses. The most commonly used washers are forms A, B and C, with more specialised variants such as Penny Washers also available. Flat washer variants range from those with small external diameters and thicknesses, to very large washers with large external diameters.
Where a flat surface is not required, components such as Countersunk Washers or Spring Washers may be preferable.
Accu's standard range of Flat Washers is manufactured from A2, A4 and Bumax Stainless Steel, with Chemical Matte Blackening available. All Stainless Steel Washers are resistant to tarnishing and corrosion, but A4 Stainless Steel is specifically designed for use in marine environments.
Flat Washers can also be manufactured from a variety of specialist materials, including Aluminium, Brass, Phosphor Bronze, Nylon, PEEK, Polycetal and Titanium. Fibre and Rubber Flat Washers are intended to be pliable for sealing purposes.
Metric Flat Washers
Metric Flat Washers are available in sizes ranging from M1 to M56. This category includes only metric flat washers – Imperial Flat Washers in imperial sizes are available separately.