M4 Serrated Flanged Nylon Locking Nuts (DIN 6926) - Marine Stainless Steel (316) Description

The M4 Serrated Flanged Nylon Locking Nuts (DIN 6926) - Marine Stainless Steel (316) has the following features:

• DIN 6926 Manufacturing Standard
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• Natural Finish
• 0.7mm Thread Pitch
• Metric Metric or Imperial?
• M4 (4mm) Thread Size
• 10mm Flange Diameter (D)
• 6.1mm Nut Thickness (L)
• Yes Serrated
• 4.2mm Thread Length (T)
• 7mm Socket Size (J)
• 7.66mm Nut Width Across Points
• +0/-0.22mm Socket Size (J) Tolerance
• +0/-0.36mm Nut Thickness (L) Tolerance

Discover more about the Serrated Flanged Nylon Locking Nuts range.

Featuring a nylon insert which grips around the threads of a fastener to help resist self loosening, the serrated flange of this locking nut provides additional grip by biting into the surface of the material. 

Another advantage to the integrated flange of this component is that it provides greater load-bearing capabilities than a standard Hexagon Nylon Locking Nut, whilst negating the need for a separate washer.

A Non-Serrated Flange Nyloc Nut is also available, featuring a smooth flange which is free from serrations, making it a more practical option when the mating surface must not be scratched, i.e. for aesthetic purposes.

For applications where a flange nut without a nylon insert is needed, Accu’s range of Flanged Hex Nuts can be used, with both metric and imperial sizes in stock.

Materials

Serrated Flanged Nyloc Nuts are manufactured in both A2 and A4 Stainless Steel.

Metric Serrated Flanged Nylon Locking Nuts

Components in this range are manufactured in accordance with the DIN 6926 standard. Metric thread sizes M3 to M12 are available, with flange diameters 7.8mm up to 26mm.